SS SERIES CONTROLLER
The SS Series Controller is a highly configurable, multiplexing switch for servo command signals. The SSC can be used to control RC servo or other UAV
servo devices. It allows the dynamic selection of servo command signals from several pulse signal sources. Pulse sources include asynchronous serial communication packets
from a control computer, pulse signals from a conventional radio control receiver or other servo pulse generator, and user definable constant signals.
SS Series Controller is used in Microbotics' APS Series Advanced Programmable Controller
assembly as a control board that forms the programming and control center of the APS series autopilot platform.
SS Series Controller Features
Small size and weight: 2.25 x 2.43 inches (57 x 62 mm), 34 grams
24 pulse signal channels with up to 16 of them definable as pulse inputs
6 auxiliary digital channels that can be assigned for general I/O, timer (e.g. RPM), or pulse signal operation
Switch between five servo command sources
Map any source to output for any command condition
Serial messages that report switch status, including the current state of the sources
All serial messages can be configured for polling or continuous output up to 50Hz
30 Day Free Support
Typical Applications for the SS Series Controller
Vehicle operation
Robotics
Unmanned vehicle development
Payload control
Radio control pilot/operator training
Radio control link redundancy (safety switch operations)
Product Specifications
Input Voltage: 10-32 VDC
Input Power: 500 mW
Serial Ports: RS-232 at 115.2 Kbaud
Digital Inputs: 3.3V CMOS, TTL-Compatible, 5V Tolerant
Digital Outputs: 3.3V CMOS, TTL-Compatible
Product Documentation
Users Manual
Application Notes